|
Advantech ADAM analog- und digital-Remote I/O
|
|
ADAM-5000/L/TCP
|
|
Preise €
|
|
|
|
|
ADAM-5000/TCP-AE: 8-Slot Netzwerk.basiertes Distributed DA&C System
ADAM-5000L/TCP-AE: 4-Slot Netzwerk.basiertes Distributed DA&C System
ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy configuration and efficient management. It is an ideal and cost-effective solution for eAutomation architecture.
* ARM 32-bit RISC CPU
* 10/100Base-T auto-negotiation high-speed communication port
* Supports Modbus/TCP for easy integration
* Supports UDP event handling function
* Up to 100 m communication distance w/o repeater
* Allows remote configuration via Ethernet
* Allows concurrent access for 8 host PCs
* 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data monitoring and control
* 1500 VDC isolation for Ethernet communication
* Built-in watchdog timer for system auto-reset
* Windows utility
* Provides ActiveX drivers to develop applications
Zubehör:
ADAM-6520-BE 5-port 10/100 Mbps Industrial Switch
PCLS-ADAMVIEW32 HMI Software for ADAM I/O Products
PWR-242-AE POWER SUPPLY DIN-rail Power Supply
PWR-243-AE POWER SUPPLY Panel Mount Power Supply
PWR-244-AE POWER SUPPLY Panel Mount Power Supply
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
ADAM-5000E
|
|
Preise €
|
|
|
|
|
ADAM-5000E-AE: 8-Slot Distributed DA&C System für RS-485
The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry's most widely used, balanced, bidirectional transmission line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
* RS-485 Communication for easy installation and networking
* 4 or 8 slots for up to 128 points data monitoring card control in one module
* Extensive software support; Windows DLL, OCX, OPC server and popular HMI/SCADA software drivers
* Seamlessly integrated with easy-to-use ADAMView data acquisition software
* Supports ADAM ASCII protocol or Modbus®/RTU protocol
* Supports Modbus/RTU protocol with user-defined Modbus address
Zubehör:
PCLS-ADAMVIEW32 HMI Software for ADAM I/O Products
PWR-242-AE POWER SUPPLY DIN-rail Power Supply
PWR-243-AE POWER SUPPLY Panel Mount Power Supply
PWR-244-AE POWER SUPPLY Panel Mount Power Supply
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
ADAM-5000/485
|
|
Preise €
|
|
|
|
|
|
ADAM-5000/485-AE: 4-Slot Distributed DA&C System für RS-485
The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry's most widely used, balanced, bidirectional transmission line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
* RS-485 Communication for easy installation and networking
* 4 or 8 slots for up to 128 points data monitoring card control in one module
* Extensive software support; Windows DLL, OCX, OPC server and popular HMI/SCADA software drivers
* Seamlessly integrated with easy-to-use ADAMView data acquisition software
* Supports ADAM ASCII protocol or Modbus®/RTU protocol
* Supports Modbus/RTU protocol with user-defined Modbus address
Zubehör:
PCLS-ADAMVIEW32 HMI Software for ADAM I/O Products
PWR-242-AE POWER SUPPLY DIN-rail Power Supply
PWR-243-AE POWER SUPPLY Panel Mount Power Supply
PWR-244-AE POWER SUPPLY Panel Mount Power Supply
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
ADAM-5510/E/TCP
|
|
Preise €
|
|
|
|
|
ADAM-5510/TCP-BE: 4-Slot PC-basierter Controller mit Ethernet-Anschluß
ADAM-5510/TCP-BE: 8-Slot PC-basierter Controller mit Ethernet-Anschluß
In the ADAM-5510 series of PC-based programmable controllers, Advantech has introduced Ethernet-enabled features. The new 4-slot ADAM-5510/TCP and 8-slot ADAM-5510E/TCP
* 10/100Base-T Ethernet interface
* Supports Web Server function
* Supports Email Alarm function
* Supports FTP Server and Client functions
* Supports Modbus/TCP Server and Client function libraries
* Supports Modbus/RTU Master and Slave function libraries
* 1.5 MB Flash ROM (960 KB for user applications)
* 640 KB SRAM (384 KB for battery backup)
* ROM-DOS operating system
* Watchdog timer and real-time clock
* 4 serial communication ports
* 4 or 8 I/O slot expansion
Zubehör:
ADAM-6520-BE 5-port 10/100 Mbps Industrial Switch
PWR-242-AE POWER SUPPLY DIN-rail Power Supply
PWR-243-AE POWER SUPPLY Panel Mount Power Supply
PWR-244-AE POWER SUPPLY Panel Mount Power Supply
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
ADAM-5510/KW
|
|
Preise €
|
|
|
|
|
|
ADAM-5510/KW-A1E: 4-Slot PC-basierter SoftLogic Controller
ADAM-5510KW is PC-based Soft-Logic Controllers. It features 5 standard IEC61131-3 programming languages so PLC users can develop control strategies in their familiar programming languages. The strong MULTIPROG software and stable ProConOS make ADAM-5510KW the best choice for PC-based SoftLogic controllers in the market. ProConOS, (Programmable Controller Operating System), has over 250,000+ installations, and is a pre-emptive, multi-tasking run-time software providing deterministic operation down to one millisecond and runs applications developed with MULTIPROG, a fully-featured IEC 61131-3 development environment. With this KW Software distribution agreement, Advantech has bundled the ProConOS run-time software on ADAM-5510KW Controllers creating a SoftLogic Solution. It will greatly benefit PLC users to enjoy the PC- based advantage of ADAM-5510KW.
Different from the original ADAM-5510 hardware, the ADAM-5510KW includes more memory to raise system efficiency and users’ programming flexibility. The ADAM-5510KW include a 1.5 MB flash memory and 640 KB SRAM which includes battery backup RAM up to 32 KB. In addition, 4 COM ports enrich the communication capacity of ADAM-5510KW to integrate with remote I/O or other 3rd party devices based on the Modbus/RTU protocol.
* IEC-61131-3 standard package
* Supports LD/FB/SFC/IL/ST language
* Graphical programming interface
* Cross programming language compiling capability
* Supports floating point calculation
* Supports AI/AO/DI/DO/Counter Function Blocks
* Powerful debug tool
* Built-in Modbus/RTU Master and Slave
* Supports up to 128 Local I/O Points
* Handles typical 32 Modbus/RTU remote I/O modules
* Supports more than 9000 coils in LD language
* Supports 3 serial ports including 1 RS-485 and 2 RS-232/485 ports
Zubehör:
MPROG-BAS33 MULTIPROG Basic V.3.3 (128-byte I/O)
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
ADAM-5510KW/EKW
|
|
Preise €
|
|
|
|
|
ADAM-5510/KW/TCP-AE: 4-Slot PC-basierter SoftLogic-Controller mit Ethernet-Anschluß
ADAM-5510/EKW/TP-CE: 8-Slot PC-basierter SoftLogic-Controller mit Ethernet-Anschluß
The ADAM-5510EKW/TP is an Ethernet-enabled SoftLogic Controller. In addition to the features of ADAM-5510KW and ADAM-5510EKW, the ADAM-5510EKW/TP has Ethernet features including Modbus/TCP Server, Modbus/TCP Client and Multiprog via Ethernet functions. Therefore, users can easily and quickly complete their programming based on Ethernet architecture. Standard Modbus Interface. For advanced system integration, the ADAM-5510EKW/TP supports not only Modbus/RTU Master and Slave functions via serial ports, but also the Modbus/TCP Client to retrieve data from remote I/O, and Modbus/TCP Server to send data back to the HMI/SCADA Software via Ethernet port. Furthermore, the ADAM-5510EKW/TP allows users to remotely maintain multiple ADAM-5510EKW/TP controllers by running Multiprog programming software via Ethernet.
* 10/100Base-T Ethernet interface
* Built-in Modbus/TCP server
* Supports Modbus/TCP client
* Supports Modbus/RTU Master
* Supports Modbus/RTU Slave
* Supports Multiprog via Ethernet
* IEC-61131-3 standard package
* Supports LD/FB/SFC/IL/ST Languages
* Cross-Language compiling program
* 8 I/O slots base and handles up to 128 Local I/O Points
* Supports AI/AO/DI/DO/Counter Function Blocks
Zubehör:
MPROG-BAS33 MULTIPROG Basic V.3.3 (128-byte I/O)
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
ADAM-5550CE
|
|
Preise €
|
|
|
|
|
ADAM-5510CE-BE: 8-Slot PC-basierter Controller mit GX2 CPU
ADAM-5550CE is a PC-based Controller designed for control tasks which require Industrial PC computing performance with a PLC form factor and I/O module design. ADAM-5550CE
* Support VGA port for local display of HMI software
* Can be operated with or without display/keyboard/mouse
* Remote monitoring through Web Server
* Remote maintenance via FTP Server
* Supports Modbus/RTU Master and Modbus/TCP (Server/Client) Protocol
* Support .NET class library in Windows CE
* Supports SD Storage I/O Module
* Supports AMONet Master Module
* Supports Motion Control Modules
* Remote I/O expansibility
* Rich support to ADAM-5000 I/O Modules
Zubehör:
MPROG-ADV33 MULTIPROG Pro V.3.3 (64K-byte I/O)
MPROG-BAS33 MULTIPROG Basic V.3.3 (128-byte I/O)
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
ADAM-5550KW
|
|
Preise €
|
|
|
|
|
ADAM-5510KW-BE: 8-Slot PC-basierter Controller mit GX2 CPU
ADAM-5510KWAS-BE: 8-Slot PC-basierter Controller mit GX2 CPU
ADAM-5550KW is a Programmable Automation Controller designed for control tasks which require Industrial PC computing performance with the PLC’s robustness. ADAM-5550KW offers an AMD Geode GX533 CPU along with control specific features such as watchdog timer, battery backup RAM and deterministic I/O. ADAM-5550KW features 5 standard IEC - 61131-3 programming languages in CE 5.0, so PLC users can develop control strategies with their own familiar programming languages. The powerful Multiprog KW Software and stable ProConOS have allowed ADAM-5550KW to become the best choice for a Programmable Automation Controller on the market today. With the optional HMI Software and built-in VGA port, no longer will users be required to build up additional SCADA PC’s in their applications. This compact and powerful PAC is ideal for a variety of applications ranging from machine automation to SCADA applications.
* Designed to handle control tasks that usually require a PLC and an Industrial PC
* SoftLogic support in Win CE 5.0
* Can be operated with or without display/keyboard/mouse
* Remote monitoring through Web Server and Email Alarm
* Remote maintenance via FTP Server
* Supports Modbus/RTU Master and Modbus/TCP (Server/Client) protocol
* Supports OPC Server
* Supports SQL database
* Supports SD storage I/O module
* Supports AMONet master module
* Supports motion control modules
* Deterministic I/O at 1 ms
* Remote I/O expansibility
* Rich support to ADAM-5000 I/O modules
Zubehör:
MPROG-ADV33 MULTIPROG Pro V.3.3 (64K-byte I/O)
MPROG-BAS33 MULTIPROG Basic V.3.3 (128-byte I/O)
|
|
|
|
Technische Dokumentation als PDF-Datei
|
|
|
|
|
|
|
|
|
|
|
